Skip to main content
Back to the connections

Follow a result back to its evidence.

Choose a result, inspect its assumptions, then run the calculation that supports it. Each check answers a specific question. The original status and the scope of that answer stay attached.

Start with the E₈ construction.

The first module builds the lattice explicitly. It checks the glue, constructs its 240 roots and tests the lattice basis. You can read the source before running it.

Question
Does the explicit construction give the even, unimodular E₈ lattice?
What is tested
Shared ℤ₄ discriminant data; glue norms 5/4 + 3/4 = 2; 240 roots of squared length 2; an integral, even basis with determinant 1.
Read the Python source

Python runs in your browser using Pyodide. The first run downloads the runtime. Its output appears in the existing verification viewer, including any failure and the local reproduction command.

This is a mathematical lattice check. Identifying that lattice with a physical system requires additional arguments and retains its own status.

Find the source behind a check.

The dated Python suite record includes four shards on each of Python 3.11 and 3.12. Read the job logs for the recorded run. The entries below describe what the modules check and link to their evidence.

Open the 6 November 2026 Python suite run

Search all 707 registered Python modules by subject, filename, claim or source section. This catalogue records source presence and links. It does not report a new execution or a passing result for every module.

707 matching modules · showing 461–480

Thirdgen mixing pattern

v467_thirdgen_mixing_pattern.py · neutrinos

Read the registered purpose, outcome and evidence links

FLAV.THIRDGEN.PATTERN.01: the three ~2σ mixing tensions (θ13, θ23, V_cb) are ONE common −φ₀ suppression (−5.36%±1.67%, 3.2σ non-zero); ladder-base forms λ_C²e^(−5/6) / (1−φ₀)/2 / λ_C²/(1+λ_C) drop the joint χ² 10.4→0.11 with zero parameters; post-hoc candidate [O], record unchanged, JUNO/Belle II decide

Read the original Python source

Dm2 ratio jarlskog

v468_dm2_ratio_jarlskog.py · neutrinos

Read the registered purpose, outcome and evidence links

FLAV.DM2RATIO.01: Δm²₂₁/Δm²₃₁ = |J_PMNS(frozen)| = 0.029653 vs measured 0.029805(792) → −0.19σ — a parameter-free candidate relation for the (previously unpredicted) splitting ratio; the informal m₂/m₃ ~ πφ₀ heuristic is now −2.44σ and retyped; NO floor Σm_ν = 0.0588 eV consistent; post-hoc [O], JUNO decides

Read the original Python source
Linked claims

Seam crossedproduct route

v469_seam_crossedproduct_route.py · frontier

Read the registered purpose, outcome and evidence links

SEAM.EQUIV.CROSSEDPRODUCT.01: the net-level crossed-product certification of the 128-spinor extension + the R1 -> R1' invariant reduction. [E] LR LOCALITY INTEGER: h_s(SO(16)_1) = 16/16 = 1 in Z => statistics phase +1 -- the Longo-Rehren criterion HOLDS, the Z2 simple-current crossed product is a LOCAL index-2 extension (LR RMP 7 (1995); Boeckenhauer RMP 8 (1996); BE CMP 197 (1998)); KLM mu = 4/2^2 = 1 => holomorphic => (E8)_1 (v463 pin, E4/eta^8 q^1 = 248). The AGT/AMT 2024/2025-preprint leg (v459) DEMOTED to independent second witness -- the extension now rests on 1995-2001 peer-reviewed journals. [E] index-4 parallel: mu4 glue h(J^k) = {1,1,1} all integer (= v125 isotropy at net level), mu = 16/16 = 1. [E] R1' invariants computed: FHS Chern 1/0, nu = 16, c_- = 8; nu mod 16 = 0 = the Kitaev-E8 class (16-fold way). [E] chain T1->T4 composes (Kitaev/Kapustin-Spodyneiko -> MMST+Boeckenhauer -> LR/BE+KLM -> Dong-Mason+v463). [C] R1 -> R1': collar_realizes replaceable by collar_invariants (quasi-free [C] + gap [E] + class D + c_-=8 [E from P1]); quasi-freeness stays the ONE [C]. [O] SEAM.EQUIV.01 stays [O]. Mixed exact (Wolfram-mirrored) + numerical (FHS Chern).

Read the original Python source

Alpha inflow level

v470_alpha_inflow_level.py · frontier

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.INFLOW.01: the alpha^3 level = the COMPUTED bulk Chern invariant + the seam F-normalisation = the affine embedding index k_Y = 5/3. [E] target re-verified: alpha^-1 = 137.0359992168 unique root; Quillen split < 1e-35 (v341/v382). [E] the invariant computed: FHS Chern C(M=1)=1, C(M=3)=0 (the v367/v461 integers, read as the U(1) response). [C] k0 = |C| = 1 under the EM1 reading: the a^3 coefficient EQUALS the computed bulk invariant -- 'why exactly 1' answered by computation + cited inflow (TKNN 1982/ASS 1983 quantisation; Callan-Harvey 1985 inflow; APS/AGDPM/Witten RMP 88 eta=CS part of delta log det; Quillen/Bismut-Freed integrality) -- replacing v435's minimality assumption. [E] k_Y = tr(Y^2)/tr(T3^2) = (5/6)/(1/2) = 5/3 (Ginsparg 1987); (3/5)(41/6) = 41/10 = b1; 41/6 = 20/3 + 1/6. [C] F-normalisation retyped: <JJ> fixed by k_Y once the seam net is (E8)_1 level 1 -- no dial, ZERO independent content (a face of SEAM.EQUIV.01). [E] UNIFICATION: one invertible phase, two responses -- c_- = 8 (feeds SEAM.EQUIV.01/S3) and C = 1 (feeds EM1); closing R1' (v469) feeds both. [O] the bridge lemma stays cited; ALPHA.QUILLEN.EXACT.01 stays [O]; alpha^-1 stays [E]. Mixed exact (Wolfram-mirrored) + numerical (root/Chern).

Read the original Python source

Seam horizon replica

v471_seam_horizon_replica.py · horizon

Read the registered purpose, outcome and evidence links

SEAM.EHMODEL.04: the Seam-Horizon replica chain exercised numerically on a discretized seam collar -- the kernel-identification premise of SEAM.THEOREM.01 (residual of v150/v151/v152) discharged at the finite/model level for the seam's own kernel, with real replica sheets. Replica => EH form on a real operator: dG/d ln m = 2C(gamma) on deficit cones (0.01-0.05%) and replica sheets n=2 (0.8%), n=3 (1.5%); EH coefficient cutoff-independent (0.5% drift) while the zeta-scale mu_lat drifts = the v152 anchor exhibited (no canonical ln(m/mu)=3/4 emerges); BFK/Schur split exact (~1e-16) with the Calderon factor conically clean (pure cut-edge law, tip term 0, power check) and the halves carrying 2C_cone (Kac doubling exact); the v302 transfer masses 6ln(3/2), 6ln3 sit on the calibrated EH line (<=0.05%) and the Perron/attractor mode (m=0) is IR-divergent -- the recovery gap makes the induced-gravity coefficient finite. Honest scope: finite level; SEAM.THEOREM.01 stays open, residual = continuum leg (MMST class, = the SEAM.EQUIV.01 residual) + the anchor. Numerical, Python-only by nature.

Read the original Python source
Linked claims

Quillen detline moduli

v472_quillen_detline_moduli.py · frontier

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.DETLINE.01: the determinant line over the U(1)-twist moduli of the collar model carries curvature = the inflow level -- the finite Quillen/Dai-Freed shadow of the v470 bridge lemma, computed. [E] Bloch level re-verified: BZ Chern C(M=1)=1, C(M=3)=0, C(M=-1)=-1 (the v470/v367 integers). [E] the Quillen object computed: the same collar h(k) in real space with twisted boundary conditions (the twist torus = moduli of flat U(1) connections); the FHS curvature of the DETERMINANT LINE of the occupied frame over that torus = 1 exactly (1e-9) at M = 1, for L = 4 AND L = 6 (size-independent). [E] controls: trivial M=3 -> 0, orientation flip M=-1 -> -1. [E] two tori, one level: twist-moduli integer == Bloch-BZ integer for all three M (Niu-Thouless-Wu PRB 31 (1985), exhibited on the S3 collar model). [E] section globally defined: Fermi gap 2.0 open over the whole twist torus (the Dai-Freed section has no zero). [C] the reading: det-line holonomy over the U(1) moduli = inflow level k0 = |C| = 1 -- the v470 bridge lemma 'delta log det_zeta(seam) = the inflow response' holds verbatim at the finite/model level. [O] not closed: the abstract-seam zeta-determinant identification (continuum leg, = the SEAM.EQUIV.01 face); ALPHA.QUILLEN.EXACT.01 stays [O]; alpha^-1 stays [E]. Numerical, Python-only.

Read the original Python source

Entropic action bridge

v473_entropic_action_bridge.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.ACTION.01: the entropic-action bridge -- Bianconi's 'Gravity from entropy' (Phys. Rev. D 111, 066001 (2025); arXiv:2408.14391) quantified as an EXTERNAL CANDIDATE for the local volume action behind TFPT's parameter-free Einstein equation (v358/v359, typed 'equation of state, not a from-action quantisation' [O]). [E] carrier Hodge count: her Omega^{0,1,2} fiber on the five-slot carrier C^5 (not 4d spacetime, fiber 1+4+6=11) counts 1+5+10 = 16 = 2^(g_car-1) = dim S+_{D5}, Hodge-folded onto L^even C^5 (vector-space identity only). [E] coefficient match (the one quantitative pin): her weak-coupling L = 3 beta R - alpha L_m matched to 1/(16 pi G) = c3/(2G) fixes beta'_B = c3/6 = 1/(48 pi) exactly; the 6 = 3 blocks x 2 = p2 = |R+(A3)| (echo, not proof). [E] entropy potential: Lambda_G = (1/2 beta)Tr(G - I - ln G) >= 0, quadratic at the fixed point => eps_* = e^{-1/alpha} Q reproduces the v60 branch (3/4 pi^2) e^{-2/alpha} with exact target Tr Q^2 = 32 c3^4 = 1/(128 pi^4) = (2/3) delta_top ([C] until Q constructed). [E] Frullani: her log action = all-scale heat kernel, right genre vs S_rel,chi. [E] R^2 kill test: raw (c3/6)^2 vs Starobinsky 1/(12 c3^7) -- exact gap 3 (8 pi)^9 ~ 1.2e13 (13 orders); direct identification FALSE without a mechanism -- pre-registered. [C] compression conjecture P (G~ g~^-1) P = Delta^1/2 + operator Hodge items open; Lorentzian positivity not automatic (OS route sturdier). [O] nothing closes, zero knobs added. Mixed exact (Wolfram-mirrored) + one quadrature.

Read the original Python source

Entropic hodge carrier

v474_entropic_hodge_carrier.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.HODGE.01: the OPERATOR level of the entropic-action bridge (work packages 1 + 4-algebra of v473). [E] CAR => Clifford: ten Gamma's on the carrier Fock space Lambda^* C^5 (dim 2^g_car = 32) satisfy {Gamma_a,Gamma_b} = 2 delta_ab exactly -- the so(10) = D5 Clifford algebra acts on the carrier exterior algebra. [E] S+ = Lambda^even as D5-module: the 45 bilinears commute with (-1)^N, span exactly 45 = dim so(10), zero leak from the 16-dim even subspace -- the half-spinor IS the even exterior algebra WITH its spinor structure (operator level of v2/v44/v197). [E] Hodge-Dirac symbol: c(xi)^2 = -|xi|^2 Id for symbolic xi -- Bianconi's D = d + delta is Clifford multiplication at symbol level. [E] the fold is 5 -> 5bar: traceless u(5) weights of Lambda^4 = negatives of Lambda^1, so the Hodge fold conjugates the vector block -- her fiber 1+5+10 becomes the GUT half-spinor 16 = 1 + 5bar + 10 (the SM carrier decomposition). [E] honest obstruction: Omega^{<=2} is NOT Clifford-invariant (Lambda^2 -> Lambda^3 leak); only Lambda^even is -- the bridge must go through the fold, never degree truncation. [E] Q-target enumeration (the v473 conjecture DECIDED): d k^2 = 32 with integer k has exactly the supports (2,4), (8,2), (32,1) = {|Z2|, rank E8, 2^g_car}; minimal uniform q = c3^2 = 1/(64 pi^2) per Fock mode; the two-form block 10 and the fiber 16 need irrational multipliers => the naive pair-block reading is KILLED; bonus Tr Q^2/delta_top = 32/48 = 2/3. [C] physical Q choice; [O] AP2 compression + R^2 mechanism open, no marker moves. Mixed exact (numpy integer Fock + sympy; Wolfram-mirrored where cheap).

Read the original Python source

Entropic scalaron gate

v475_entropic_scalaron_gate.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.SCALARON.01: the R^2 kill test of the entropic-action bridge EXECUTED (work package 5 of v473) + the explicit Lorentzian-positivity witness. [E] max-symmetric eigenvalues (her Appendix-B flattening verified): R~ g~^-1 has eigenvalues exactly {R; R/4 x4; R/6 x6} on a general diagonal 4d metric, incl. the 6x6 two-form flattening. [E] exact vacuum f(R): L_B(R) = -[ln(1-bR) + 4 ln(1-bR/4) + 6 ln(1-bR/6)] = 3 beta R + (17/24) beta^2 R^2 + O(R^3) -- the 3 re-derives her Eq. (45) (the v473 pin), 17/24 the exact tensorial R^2 factor. [E] raw scalaron TRANS-PLANCKIAN: with beta' = c3/6 both routes give m_raw^2 = 4608 pi^2/17 Mbar^2, m_raw ~ 51.7 Mbar ~ 1.3e20 GeV -- heavy, not light (TFPT: c3^{7/2} Mbar = 3.06e13 GeV); required enhancement EXACTLY (72/17)(8 pi)^9 ~ 1.69e13 in mass^2 -- v473's interpretation 2 (light G-trace mode) KILLED in naive form. [E] domain: first log pole at R = 384 pi^2 Mbar^2 (trans-Planckian) -- the obstruction is the mass, not the domain. [E] Lorentzian witness: timelike gradient gives eigenvalue 1 - alpha v^2 <= 0 for v^2 >= 1/alpha (ln undefined); spacelike/Euclidean positive -- the v473 caveat exhibited, the OS route sturdier. [C] verdict: interpretation 1 survives (Einstein + Lambda level), 3 (KMS-spectral renormalisation) is the only surviving R^2 route. [O] unchanged: AP2 compression + the R^2 gate; no marker moves. Exact (sympy, Wolfram-mirrored).

Read the original Python source

Entropic compression toy

v476_entropic_compression_toy.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.COMPRESS.01: the AP2 compression conjecture of the entropic-action bridge (v473) made WELL-POSED on an exactly solvable model. [N] pure gapped bulk: staggered-mass chain, ground-state covariance a projection (pure bulk, thermal boundary -- the seam situation). [N] compression is thermal (v155 in the bridge context): spec(PCP) strictly inside (0,1), Peschel K finite, S > 0. [N] ORDER OBSTRUCTION (the reading decided): on the pure bulk f(x) = x/(1-x) is singular on spec(C) = {0,1} -- the literal operator-side reading P f(C) P is ILL-POSED while f(PCP) is finite: the identity can only be read STATE-SIDE (build Delta_Sigma from the compressed relative metric), matching Bianconi's own local construction -- AP2 retyped, not weakened. [E] block algebra (symbolic): [C^n]_AA - (C_AA)^n carries the cross block twice -- first order vanishes identically, the mismatch is exactly quadratic in cross-cut correlations (= the entanglement content). [N] gap control at the bounded level: bulk identity f(C_T) = e^{-h/T} exact; mismatch obeys d <= x^2 and falls with the gap; decoupled cut exact -- the two readings converge in the gap-dominated regime, where TFPT operates. [C] retyped conjecture; [O] AP2 open (continuum seam statement), no marker moves. Numerical, Python-only by nature.

Read the original Python source

Entropic scaleflow

v477_entropic_scaleflow.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.SCALEFLOW.01: the scale-flow representation of the entropic action -- v475's surviving interpretation 3 typed precisely: the (72/17)(8 pi)^9 gap collapses to ONE moment condition on the scale weight, satisfied by the SAME KMS moment TFPT already fixes (v36 f0 <-> M^2 = c3^7 Mbar^2); zero new dials, nothing closes. [E] scale-flow identity: -ln A = flat scale-integral of relative heat-kernel actions (Frullani symbolic + 1e-20 quadrature of the chi-form) -- TFPT's S_rel,chi evaluates ONE KMS scale with a weight: the bridge is a choice of scale measure. [E] moment dictionary: weight w(t) dt/t gives 3 beta R mu1 + (17/24) beta^2 R^2 mu2; flat weight = unit moments = the v475 raw coefficients. [E] the one moment condition: demanding m^2 = c3^7 Mbar^2 forces exactly mu2/mu1^2 = (72/17)(8 pi)^9 -- the kill-test number IS a moment ratio, and the closure (4608 pi^2/17)/((72/17)(8 pi)^9) = c3^7 holds identically: the 13 orders are a scale-measure datum, not a bridge mismatch. [E] v36 consistency: same mass from f0 = 6(4 pi)^2/c3^7 -- one KMS moment, two parametrisations. [C] consistency not derivation (the weight is TFPT input); negative side-record: the exact lattice-BW commutator attempt for AP2 did not hold in simple forms (logged, kept out). [O] unchanged.

Read the original Python source

Entropic continuum legs

v478_entropic_continuum_legs.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.ENTROPIC.LEGS.01: first computable steps on the two remaining legs of the entropic-action bridge. LEG A (AP2 continuum): [N] the compressed critical interval has S(L) = (c/3) ln L + k with c_est = 1.00089/1.00038/1.00021 (monotone -> Dirac c = 1; gapped control ~6e-8, area law); the Peschel modular Hamiltonian's NN couplings organise on the CHM weight beta(x) = x(L-x)/L (corr 0.87 -> 0.99, plateau drift shrinking); even-range bands vanish identically and the odd tail is 1.8% with parabolic envelope -- the state-side Delta_Sigma (v476's forced reading) flows to the CHM/BW geometric form that TFPT's Einstein derivation consumes (v323/v358): the bridge's modular side and TFPT's gravity side meet in the continuum limit. LEG B (measure): [E] single-scale corollary -- mu2/mu1^2 = e^{t0} exactly, so the v477 condition forces t0 = ln(72/17) + 9 ln(8 pi) = 30.461 (exact closed form); the near-miss to h(E8) = 30 is explicitly DECLINED (v354/v355 discipline); deriving the measure stays open. [C] meeting point; [O] both legs, no marker moves. High-precision numerical (mpmath 50 digits), Python-only by nature.

Read the original Python source

Kronheimer quiver bridge

v479_kronheimer_quiver_bridge.py · core

Read the registered purpose, outcome and evidence links

SEAM.KRONHEIMER.01: the R3 'combinatorial-to-geometric bridge' of the det K=1 keystone (SEAM.DETK.01/v344) is Kronheimer's theorem (JDG 29 (1989) 665+685) with all finite input data already compiler outputs. [E] Kac marks = null vector of the affine-E8 Cartan AND Perron vector (A delta = 2 delta) = the v312 rewrite-attractor vector; [E] hyper-Kaehler quotient dimension count dim_R X = 4 (the C^2/Gamma geometry), with sum_edges d_i d_j = sum d_i^2 = 120 forced by the null identity; [E] gauge datum = |2I| = 120 = |mu4| h(E8), h(E8) = 30 = 2*3*5; [E] resolution = 8 spheres with unimodular -E8 form (det 1 = Poincare link = the det K=1 face) and 24 = 3*rank deformation parameters. [C] Kronheimer cited, not re-proved (import class of NPW26/MMST/AGT). [O] the residual premise transforms to 'the raw seam supplies the ALE/orbifold datum' -- the same single arrow as SEAM.EQUIV.01; nothing closes.

Read the original Python source
Linked claims

Multilocal four interval

v480_multilocal_four_interval.py · frontier

Read the registered purpose, outcome and evidence links

QGEO.MULTILOCAL.01: the four mu4 marks make the seam circle a FOUR-INTERVAL free-fermion geometry -- the class whose multi-interval modular theory is exactly known (Casini-Huerta mixing term; Longo-Xu; Rehren-Tedesco multilocal fermions; KLM: holomorphic <=> trivial multi-interval inclusion, mu=1 -- the same bit as det K=1). On the exactly solvable antiperiodic ring: [E-num] binary clock rho^4 = -1 exactly (the fermionic mu4 clock is the order-8 double-cover lift, the same Z2-lift pattern as 2I over I); [E-num] the primitive-8th-root character projectors decouple the 4-interval covariance at 1e-15 (the multilocal diagonal-cover isomorphism); [E-num] each sector = single-interval quarter-ring kernel with twist lambda_k, spectra match at 1e-14; [E-num] rho C rho^-1 = C at 1e-14 => omega o rho = omega MANIFEST at the state level; [E-num] negative control: one displaced interval re-couples sectors at 1e-2; [N] cross-interval K peaks on the conjugate diagonal (Casini-Huerta mixing shadow). [C] continuum theory cited; [O] the raw-seam premise stays open -- mechanism exhibited, not closed.

Read the original Python source
Linked claims

Seesaw carrier ladder

v481_seesaw_carrier_ladder.py · neutrinos

Read the registered purpose, outcome and evidence links

FLAV.NUSCALE.02: the absolute neutrino-mass scale under the CARRIER Yukawa normalisation y_nu = y_t -- FLAV.NUSCALE.01's two-parameter (y_nu, M_R) trade-off collapses to ONE parameter, and the required M_R lands INSIDE the compiler's own PS window; the nearby integer c3-rung is explicitly DECLINED at 1-loop (anti-numerology). [P] carrier normalisation (named premise): one SO(10) 16 per family + minimal Yukawa sector (10_H / PS (1,2,2)) => y_nu = y_t at the matching scale. [N] inversion: m_3 = 0.0503 eV demands M_R = 9.3e13 GeV, inside [4.2e13, 2.4e15] (v249), at log_c3(Mbar/M_R) = 3.15 (y_nu = 1 gives the structureless 2.58). [X] integer-rung honesty gate: M_R = c3^3 Mbar predicts m_3 = 0.030 eV (40% low at 1-loop; ADKLR run-down 0.794) -- NEAR, not ON: pin DECLINED; decision computation named (2-loop + PS thresholds). [N] falsifiable band [0.002, 0.115] eV brackets the observation; DESI cuts the window from below; NO floor Sigma = 0.059 eV. [C]/[O] candidate class (genre v467/v468); frozen record untouched; nothing closes.

Read the original Python source
Linked claims

Seesaw rung decision

v482_seesaw_rung_decision.py · neutrinos

Read the registered purpose, outcome and evidence links

FLAV.NUSCALE.03: the decision computation named by v481, EXECUTED in bracketed form -- the integer rung M_R = c3^3 Mbar is EXCLUDED as an unstructured exact pin (conditional on the carrier premise y_nu = y_t). [E-num] gap: m_3(rung) = 0.0301 eV vs 0.0503 observed, rescue factor x1.670; [E-num] bracketed exclusion: m_t +-3 GeV (>3 sigma), alpha_s >3 sigma, kappa run-down +-10%, PS-leg beta envelope x[0.5,1.5] -- max single shift x1.10, all-favourable combined x1.165, far below x1.670: the 1-loop miss is NOT an RG artifact. [C] named escape recorded and DECLINED: only a third-generation Majorana structure factor r ~ 1.67 revives the rung; post-hoc r = 1.6696 sits 0.18% from g_car/N_fam = 5/3 -- no forcing mechanism, declined per the anti-numerology rule (the t0 ~ 30 pattern). [O] the v481 one-parameter window candidate stands unchanged; frozen record untouched; nothing closes.

Read the original Python source
Linked claims

Pillowcase exact traces

v483_pillowcase_exact_traces.py · core

Read the registered purpose, outcome and evidence links

HYP.PHI0.GEOM.01: the GEOMETRIC side of the phi0 puncture target (HYP.PHI0.PUNCTURE.01/v408) is EXACT -- every twisted/orbifold heat trace of the flat tau = i pillowcase is a t-INDEPENDENT RATIONAL, so the pi^-4 in dtop = 48 c3^4 cannot come from flat orbifold geometry at any order. [E-num] Tr(gamma e^{t Delta}) = 1 exactly for gamma = sigma, rho, rho^3 at every tested t (position-space Gaussian image sums < 1e-9; mode-space proof: only n = 0 is gamma-diagonal); [E] Atiyah-Bott match: 4 x 1/4 (det = 4 = |mu4|) and 2 x 1/2 (det = 2 = |Z2|); [E] pillowcase contact term exactly 1/2 = 4 x 1/8 per mark, clock-equivariant trace exactly 1, all t. [E]/[O] the reduction: dtop's analytic content must sit in the per-insertion coupling normalisation (4 = |mu4| insertions of weight c3 -> c3^4, multiplicity Omega_adm = 48; the bare 1/(2pi) 4-cycle differs by the exact rational 3/16) -- the one remaining [O] is the rule 'per-mark weight = c3' (same class as EM.WARD.02). Target narrows from 'derive the term' to 'derive the weight'; stays open.

Read the original Python source
Linked claims

Seam contact unit

v484_seam_contact_unit.py · core

Read the registered purpose, outcome and evidence links

SEAM.CONTACT.UNIT.01: the shared 'c3 per boundary insertion' rule of the two open analytic targets (ALPHA.QUILLEN.EXACT.01 c3-ladder {0,3,6}; HYP.PHI0.PUNCTURE.01 per-mark weight c3) is ONE identity and NOT a new unknown: it is the KMS seam unit 2pi = 1/(4c3) with 1/4 = 1/|mu4| (v239) -- one bare boundary propagator orbit-averaged over the four marks. [E] unit chain 1/(2pi) = 4c3 = |mu4| c3 = |Z2| chi(S^2) c3; [E] mechanism derived on the seam circle: G(d) = -(1/pi) ln|2 sin(d/2)| takes INTEGER multiples of c3 ln2 at the mu4 separations (G_marks = -4 c3 ln2 circ(0,1,2,1), spec {4,-2,0,-2}); the orbit-averaged insertion carries exactly -(c3 ln2) C, so the log-det contact expansion is exactly graded in c3 per insertion (Tr C^k = 4^k + 2(-2)^k integer); [E] the grammar is suite-wide: Lambda prefactor 3/(4pi^2) = 48 c3^2 (v60) = the same Omega_adm = 48 as the phi0 puncture at two insertions; g-2 divides by the same 2pi = 1/(4c3). [C]/[O] the two [O] targets MERGE into one named analytic step (diagonal zeta-renormalisation + multiplicity matching); finite cycle sector proven; nothing closes, no coefficient claimed.

Read the original Python source

Contact diagonal closed

v485_contact_diagonal_closed.py · core

Read the registered purpose, outcome and evidence links

SEAM.CONTACT.UNIT.02: the diagonal channel of the merged analytic target (v484) settled at the computable level -- the merged residual collapses onto the keystone. [E] diagonal zero at the KMS scale: G_reg(0; l) = (1/pi) ln(l/2pi) exactly, vanishing iff l = 2pi = 1/(4c3) (the v239 KMS circumference) -- the seam scale is the unique zero-self-energy scheme point; [E] the log is the pure scale channel, matching F_U(1)'s single log term (transport 8b1 c3^6 ln(1/phi_seam)) vs the log-free phi0 split; [E] closed-form resummation (BFK route, v151 class): det(I - uC) = (1-4u)(1+2u)^2 with u = eps c3 ln2 -- all orders, linear term absent because the diagonal vanishes (Tr C = 0), series = v484's Tr(C^k); [E] weight dichotomy: the SAME 48 = 3x16 states counted flat give the phi0 multiplicity 48 = Omega_adm, and Y^2/loop/GUT-weighted give the alpha budget 41 = 10b1 = 40 + 1 (Tr_16 Y^2 = 10/3 exact, Ginsparg (3/5)(41/6) = 41/10). [C]/[O] with v484 every finite piece of the merged target is proven; the single remaining [O] is the abstract-seam zeta-det identification = a face of SEAM.EQUIV.01 (the v382 typing, now substantiated). Nothing closes.

Read the original Python source

Transfer full rule

v486_transfer_full_rule.py · core

Read the registered purpose, outcome and evidence links

HYP.REWRITE.02: the FULL physical transfer spectrum {1, (2/3)^6, (1/3)^6} now has ONE local recursive generator -- the lazy Z2-pair walk. [E] uniqueness: the symmetric 3-channel rule M(s,h) (one absorbing family channel + Z2 pair) has survival spectrum {s+h, s-h}; demanding the physical pair {2/3, 1/3} forces uniquely (stay, hop, leak) = (1/2, 1/6, 1/3) = (1/|Z2|, 1/(|Z2| N_fam), 1/N_fam); [E] over the order-6 = 2 N_fam = |R+(A3)| hand it generates eig(B^6) = {64/729, 1/729} exactly -- the previously generator-less (1/3)^6 mode gets its origin (subdominant gap 6 ln 3, alongside the recovery gap 6 ln(3/2)); [E] v327's uniform rule (spectrum {2/3, 0}) can never produce the third mode under any power -- superseded as full-spectrum generator (its 2/3 arity story unchanged); [O] the arity {2,3} stays the anchor input and the lazy-vs-uniform split is selected by the physical spectrum (named candidate: stay = 1/|Z2| as the sheet-symmetric choice). Exact, nothing closes.

Read the original Python source
Linked claims

Different evidence answers different questions.

A numerical calculation, a formal theorem and an experimental comparison carry different kinds of information. Follow the source appropriate to the claim.

Python calculations
Inspect the algorithm, its inputs and its negative controls. Run a browser compatible module here, or use the repository for the complete environment.Browse Python sources
Formal mathematics
Read the actual Lean statement and its assumptions. The carrier formalization has a defined mathematical scope.Inspect the Lean formalization
Independent implementation
The Wolfram implementation checks algebraic results through a separate computational path. The recorded runs report 116/116 base checks and 623/623 extension checks. This is distinct from external experimental replication.Read the Wolfram implementation
Physical comparison
Read each prediction with its freeze, conditions and failure criterion. A passing mathematical check does not decide the experimental comparison.Open the prediction register

What Lean proves and what it assumes.

The public source registry indexes 69 Lean files and 908 declarations. The declarations include definitions, interfaces and theorems. Each theorem has its own hypotheses.

Carrier rank
The Pascal carrier equation has the unique solution g = 5.Read the Lean statements
Hypercharge
The specified 3+2 carrier has the stated diagonal charges, zero trace and carrier polynomial.Read the Lean statements
Finite lattice glue
The isotropic glue for the stated discriminant form is unique up to sheet exchange. The carrier index arithmetic is exact.Read the Lean statements
Finite code structure
The Hamming code properties are checked on the explicit finite code.Read the Lean statements
Conditional clock theorem
Mark locality implies clock invariance in the given model. The physical seam must still be shown to satisfy mark locality.Read the Lean statements
Conditional continuum interface
The reduction uses named scaling limit and identification hypotheses. Its Lean statement records those inputs.Read the Lean statements

The CI core checks theorem signatures and declared axiom dependencies. Named seam assumptions remain explicit in the corresponding proofs. The physical identification of the original interacting source, full 3+1D dynamics and quantum gravity have separate requirements.

Run the same check on your machine.

From a checkout of the repository, install its Python requirements and run the first lattice module. The complete suite is a separate step.

Set up the repository

git clone https://github.com/sthamann/topological-fixed-point-theory.git
cd tfpt
python3 -m venv .venv
.venv/bin/pip install -r requirements.txt

Check the E₈ lattice

.venv/bin/python verification/v1_e8_glue.py

Read the individual checks and the final pass or fail result.

Run the registered suite

cd verification
../.venv/bin/python run_all.py

The full suite uses the dependencies and source context documented in the repository.

Repository setup and maintenance instructions

Read the current claim beside its source.

The research snapshot dated 2026-11-09 includes the active ledger, reviewed findings and registered scripts. It records source coverage and stated scope; it is not a new execution of every proof or calculation.

Trace the dependencies.

Select a node to inspect its inputs, outputs, scope and verification scripts. Browser compatible checks open the same verification viewer; native certificates provide their local command.

Explore the complete dependency graph

Keep the detailed research in reach.

The script index, figures and detailed research interfaces remain available below. This older technical overview preserves its original statements; use the current result inventory to follow later scope corrections.

Open the script index, figures and research details