Skip to main content
Back to the connections

Follow a result back to its evidence.

Choose a result, inspect its assumptions, then run the calculation that supports it. Each check answers a specific question. The original status and the scope of that answer stay attached.

Start with the E₈ construction.

The first module builds the lattice explicitly. It checks the glue, constructs its 240 roots and tests the lattice basis. You can read the source before running it.

Question
Does the explicit construction give the even, unimodular E₈ lattice?
What is tested
Shared ℤ₄ discriminant data; glue norms 5/4 + 3/4 = 2; 240 roots of squared length 2; an integral, even basis with determinant 1.
Read the Python source

Python runs in your browser using Pyodide. The first run downloads the runtime. Its output appears in the existing verification viewer, including any failure and the local reproduction command.

This is a mathematical lattice check. Identifying that lattice with a physical system requires additional arguments and retains its own status.

Find the source behind a check.

The dated Python suite record includes four shards on each of Python 3.11 and 3.12. Read the job logs for the recorded run. The entries below describe what the modules check and link to their evidence.

Open the 6 November 2026 Python suite run

Search all 707 registered Python modules by subject, filename, claim or source section. This catalogue records source presence and links. It does not report a new execution or a passing result for every module.

707 matching modules · showing 381–400

Grav amplitude

v386_grav_amplitude.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.AMPLITUDE.01: the entire-form-factor graviton-exchange AMPLITUDE is finite, UV-softened and tree-unitary -- perturbative gravity as an explicit scattering problem, extending v304/v370/v380 from the propagator to the amplitude. The dressed spin-2 propagator P=e^{-p^2/M^2}/p^2=1/(p^2 a), a(u)=e^u, M=M_scal. [E] one pole, ghost-free: a entire & nowhere zero (v380) => only pole at p^2=0, residue e^0=1>0. [E] UV-softened: ratio e^{-u} at u=1,5,10,20=0.37,6.7e-3,4.5e-5,2.1e-9 (faster than any power). [E] low-energy = GR + a calculable -p^2/M^2 correction (M=M_scal=c3^{7/2}Mbar, v253). [C] tree unitarity: a single positive-residue pole, no negative-norm states (v370/v380). [C] the amplitude A=(kappa^2/2)(T.P2.T')e^{-p^2/M^2}/p^2 is GR at low energy, softened in the UV (perturbative-only; QG.AMB.01 a [C] redundancy v369). No new number.

Read the original Python source
Linked claims

Corrections gap

v387_corrections_gap.py · frontier

Read the registered purpose, outcome and evidence links

CORRECTIONS.GAP.01: the practical harvest of v383 -- the same spectral gap that makes each sector parameter-free ALSO sets the SIZE of its first correction (correction_n ~ (lambda_2/lambda_1)^n). [E] FLAVOR: lambda_2=(2/3)^6=64/729 => first Koide correction ~0.088 (v56/v82). [E] RECOVERY: the same (2/3)^6 Petz rate (v221). [E] QG: capped by chi=1/(1-(2/3)^6)=729/665 (v337). [E] DISCRETE COMPILER: the update (A+2I)/4 fixes the Kac marks (lambda_1=1) and decays at the golden (phi+2)/4~0.905 (carrier-5 facet, v303/v312). [E] the rates split into the (2/3)^6 family (family-3, in Q) and the golden family (carrier-5, in Q(sqrt5)) -- the two facets of v314/v383. [C] the correction calculus: the gap does double duty (WHY no free parameter AND HOW BIG the first correction), so sub-leading magnitudes are organised, not free. No new number.

Read the original Python source
Linked claims

Corrections budget

v388_corrections_budget.py · frontier

Read the registered purpose, outcome and evidence links

CORRECTIONS.BUDGET.01: the gap correction (v387) is a TYPED budget, NOT a uniform band on every prediction -- the (lambda_2/lambda_1)^n size is a property of the distance from a gapped operator's leading eigenvector, so it is only defined where lambda_2 exists. The prediction surface splits into four correction classes (already implied by v303). [E] SEAM-GAPPED: Koide (F_pole v303), recovery (v221), the QG bound (capped by chi=729/665, v337) carry (2/3)^6; the discrete compiler decays at the golden (phi+2)/4 (v312). [E] KOIDE FIRST CORRECTION (door #2): F_pole is the ONE seam-gapped prediction, rate (2/3)^6~0.0878 (v371), source quotient 0.33% below 2/3 -- the rate is the suppression SCALE, not the residual. [E] EXACT-IDENTITY class (det R=8, N_Phi=1, theta_eff=0, sin^2 theta13): no lambda_2 => correction 0 STRUCTURALLY (a band would contradict [E]). [E] EXTERNAL-RATE class (eta_B/axion/m_p,m_e): the gapped shape with external rates (only F_pole has the seam rate, v303), firewalled (v187). [E] FIXED-POINT class: the texture is already explicit (theta12 eps=c3+36 c3^4). [C] a uniform band on all predictions is WRONG; the size is keyed to the mechanism class. A typing of v387, no new number.

Read the original Python source

Grav loop finiteness

v389_grav_loop_finiteness.py · frontier

Read the registered purpose, outcome and evidence links

GRAV.LOOP.FINITE.01: the entire-form-factor graviton is UV-finite at the LOOP level by power counting -- the honest next step past v386 (tree). Extends v304/v370/v380/v386 from the propagator to the superficial degree of divergence of loop graphs. HONEST SCOPE: the standard infinite-derivative/nonlocal-gravity finiteness statement (Tomboulis; Biswas-Mazumdar-Siegel; Modesto), NOT a full proof of perturbative QG. [E] super-polynomial falloff p^k e^{-p^2/M^2}->0 for every k. [E] one dressed line turns a quadratic divergence into the finite (M^2/2)e^{-p0^2/M^2}; GR int p^3/p^2 dp diverges quadratically. [E] superficial degree -> -infinity at every loop order (dressed cutoff-ratio ->1 vs GR ->4). [E] the regulator is the SEAM scale M=M_scal=c3^{7/2}Mbar (v253/v259), not a dial. [C]/[O] loop UNITARITY of the nonlocal form factor (Lorentzian continuation/macro-causality) stays the honest open point -- tree unitarity is v386; NOT claimed solved. No new number.

Read the original Python source
Linked claims

Prime2 facet

v390_prime2_facet.py · frontier

Read the registered purpose, outcome and evidence links

COXETER.PRIME2.01: the prime-2 facet of the order-30 Coxeter clock, completing v383. The clock 30=2*3*5=h(E8) had two named number-field facets (golden phi in Q(sqrt5), prime-5/carrier; (2/3)^6 in Q, prime-3/family); this names the prime-2 facet, identified with the Gaussian field Q(i) -- tau=i and the order-4 mu4=Z/4 square seam deck (v282/v288/v333), structure already in the theory. [E] h(E8)=30 factors into exactly three primes. [E] one quadratic facet field per prime, each ramified at its prime: disc Q(i)=-4, disc Q(sqrt-3)=-3, disc Q(sqrt5)=5; ramified primes {2,3,5}, product=30. [E] prime-2 Gaussian facet: min poly x^2+1, tau=i, j(i)=1728=12^3, |mu4|=4=2^2 (the static seam-orientation facet). [E] prime-5 golden (v383): 2cos(pi/5)=phi (pentagon). [E] prime-3 family (v383/v220): (2/3)^6 + Eisenstein zeta_3 (hexagonal CP pi/3). [C] completion: each prime carries a facet (square/hexagon/pentagon = seam/CP/carrier), the prime set forced by h(E8). A synthesis, no new number.

Read the original Python source
Linked claims

Alpha quillen progress

v391_alpha_quillen_progress.py · em

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.PROGRESS.01: an HONEST attempt at the external target ALPHA.QUILLEN.EXACT.01 (v382) -- it REDUCES the open step to a sharper named sub-target via a solvable model but does NOT close it; ALPHA.QUILLEN.EXACT.01 stays [O] (external math, type A, v384). [E] solvable model: det_zeta(-d^2/dtau^2+m^2) on a circle = (2 sinh(beta m/2))^2, m-variation beta*coth(beta m/2) = 2/m + (beta^2/6)m - (beta^4/360)m^3+... a closed heat-kernel/Laurent series (m^3 coeff -1/360 verified). [E] a zeta-det variation is structured heat-kernel data, so v382's 8 b1 c3^6 counterterm (Gauss-Bonnet heat-kernel power) is the right KIND of object. [E] the v382 split re-verified at alpha^-1=137.0359992. [E] reduction: the open step reduces to the named sub-target 'seam Seeley-DeWitt coefficient = 8 b1 c3^6'. [O] NOT CLOSED: the actual seam zeta-det proof stays open, SEAM.EQUIV.01 continuum existence (v336) the other external [O]; alpha^-1 stays [E]. An attempt that reduces, does not close.

Read the original Python source

Alpha quillen heatkernel

v433_alpha_quillen_heatkernel.py · em

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.PROGRESS.02: a SECOND honest step on the external target ALPHA.QUILLEN.EXACT.01 (v382) -- it GROUNDS and CONNECTS, it does NOT close it; ALPHA.QUILLEN.EXACT.01 stays [O] (external math, type A, v384), alpha^-1 stays [E]. [E] a solvable 4D model (flat Delta=-d^2+m^2 on T^4) reaches the a_4 (t^0) conformal-anomaly order: a_4=V m^4/(2(4pi)^2) NON-ZERO -- the order v391's 1D circle toy (a_0,a_1 only) could not reach. [E] it is the order v342 grounds (Gilkey a_4 gauge-curvature 30/360=1/12), unifying v391 (a zeta-det variation IS heat-kernel data) with v342 (the term IS the Gilkey a_4). [E] (4pi)^-2 = 4 c3^2 is c3-built. [E] the v382 split re-verified at alpha^-1=137.0359992. [O] NOT CLOSED: the actual seam a_4 (=8 b1 c3^6) and the cubic a^3 Chern moment stay open (v384); the exact seam F-normalisation stays [C] (v342). Grounds/connects, does not close.

Read the original Python source

Alpha quillen betafunction

v434_alpha_quillen_betafunction.py · em

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.PROGRESS.03: a THIRD honest step on ALPHA.QUILLEN.EXACT.01 (v382) -- it settles the three residuals named after v433 and shows they are NOT three independent problems; the target stays [O], alpha^-1 stays [E]. [E] b1 IS THE U(1) a_4 HEAT-KERNEL COEFFICIENT (beta=a_4 theorem): from the carrier hypercharge content with spin weights (2/3 Weyl, 1/3 complex scalar), sum (2/3)Y_f^2+(1/3)Y_s^2 = 41/6 (SM), (3/5)*that = 41/10 = b1 (GUT) -- the b1 in 8 b1 c3^6 is the a_4 content coefficient, not a fitted multiplicity (same number as the beta, v159/v246; same KIND as the alpha^2 Calderon a_4, v342). [E] 8 b1 c3^6 = b1*(rank E8)*c3^6 (rank 8 = chi=2 boundary, v216; c3^6 = six insertions, v342). [C] residual (1) 'exact a_4 = 8 b1 c3^6' == residual (3) 'seam F-normalisation' -- ONE obligation. [E] residual (2) located: a^3-2c3^3 a^2 = a^2(a-2c3^3), so a^3 = the first moment of the Chern density (a level, order c3^0); origin stays [O]. [E] net reduction: the EM-Ward residual is 1[C]+1[O], not three. [O] NOT CLOSED; alpha^-1 stays [E]. Python-only.

Read the original Python source

Alpha quillen chernlevel

v435_alpha_quillen_chernlevel.py · em

Read the registered purpose, outcome and evidence links

ALPHA.QUILLEN.PROGRESS.04: a FOURTH honest step on ALPHA.QUILLEN.EXACT.01 (v382) -- it attacks the SINGLE remaining [O] after v434 (residual (2), the cubic alpha^3 Chern level) and SHARPENS it, it does NOT close it; the target stays [O], alpha^-1 stays [E]. [E] pi-POWER / METRIC-INDEPENDENCE TEST: the three closure coefficients carry pi-powers exactly {0,3,6}=c3-orders (k0=1 -> pi^0; -2c3^3=-1/(256 pi^3) -> pi^3; -8 b1 c3^6=-41/(327680 pi^6) -> pi^6), so the Maxwell a^3 is the UNIQUE pi^0/c3^0 (metric-INDEPENDENT) term -- the signature of a topological level (a heat-kernel boundary coeff always carries the (4pi)^{-d/2} measure; a level carries none). The test partitions the closure into ONE topological level (a^3) + TWO heat-kernel boundary terms, confirming v342/v434's 'a^3 is a level, not a curvature integral' from a test. [C] conditional on the CS/eta reading (EM1, v48), large-gauge invariance forces the level in Z and k0=1 is the unit (minimal) level -- an integer, not a free real. [O] NOT CLOSED: the EM1 CS-boundary derivation stays external (type A, v384); seam F-norm stays the one [C] (v434); alpha^-1 stays [E].

Read the original Python source

Seam s3 scalinglimit

v392_seam_s3_scalinglimit.py · core

Read the registered purpose, outcome and evidence links

SEAM.S3.SCALINGLIMIT.01: an HONEST attack on the one open lemma of SEAM.EQUIV.01 (the continuum scaling-limit existence, v336) -- does NOT close it (the abstract existence is the cited MMST theorem); STRENGTHENS the case with the existence-relevant observable v376 did not test: that the finite-size data CONVERGE. [E] the Calabrese-Cardy EE slope c1(L) at L=66..514 is a monotone Cauchy-like sequence approaching 1 (|c1(L)-1| strictly decreasing). [E] a 1/L Richardson fit gives c1(inf)~1.000 so the 16-Majorana collar c=8*c1~8.00 = g_car+N_fam is reached IN the limit. [E] the successive differences are strictly decreasing (numerical Cauchy, necessary for existence). [O] convergent data are evidence, not a proof of existence (MMST v336), and do not pin (E8)_1 vs SO(16)_1 (holomorphy v377/v378). Strengthens the residual, does NOT close it.

Read the original Python source

Corrections numeric

v393_corrections_numeric.py · frontier

Read the registered purpose, outcome and evidence links

CORRECTIONS.NUMERIC.01: the typed correction budget (v388) turned into ACTUAL first-correction magnitudes -- a computed theoretical-uncertainty surface, the short-term testable harvest of v388. [E] FIXED-POINT band (theta12/theta13/lambda_C/beta_rad) = the explicit phi0 puncture term 36 c3^4/c3 = 9/(128 pi^3) ~ 0.227% (exact; = theta12's epsilon first-correction). [E] SEAM-GAPPED band (Koide/recovery) = (2/3)^6 ~ 8.78%; QG bound capped by chi-1 = 64/665 ~ 9.62% (v337). [E] EXACT-IDENTITY band = 0 structurally (det R=8, N_Phi=1, theta_eff=0). [E] EXTERNAL-RATE band = external physics quoted (m_p/m_e +-7.5% v374; n_s/r N* band; eta_B 1.07x v212), fenced v187. [C] each prediction gets 'central value +- computed first correction'. A harvest of v388, no new number.

Read the original Python source

Phi0 icosahedral

v396_phi0_icosahedral.py · frontier

Read the registered purpose, outcome and evidence links

HYP.PHI0.01: the phi0 leading term from icosahedral combinatorics (sharpening v312/v395). [E] ICO COUNTS ANCHOR-FORCED: V=12, E=30=h(E8), F=20=g_car(g_car-1), |Aut|=120=4h=|2I|. [E] LEADING TERM EXACT: phibase=1/(6 pi)=(4/3)c3=F/(4h pi)=F/(|Aut| pi)=(F/(g_car N_fam))c3. [E] F/h=|Z2|/N_fam; phibase=(F/h)/(4 pi)=c3(g_car-1)/N_fam. [E] GAUSS-BONNET: icosahedron deficit sum 4 pi; c3=1/(|Z2| 4 pi) (v216/v342). [E] HONEST NEGATIVE: puncture 48 c3^4 not rational hypergraph fraction. [C] phibase = (hyperedges)/(g_car N_fam) x c3, not independent injection; puncture [O].

Read the original Python source
Linked claims

Hypergraph coupled

v395_hypergraph_coupled.py · frontier

Read the registered purpose, outcome and evidence links

HYP.COUPLED.01: the coupled hypergraph rewrite -- one local rule unifies v299+v327+v324 (carrier x family). [E] LOCAL COUPLED MICRO-RULE: state on 9 affine-E8 nodes x 3 family slots; one micro-step = network lazy diffusion on each cusp column + v327 M on each node's family vector; steps commute, T_micro = T_net (x) M. [E] JOINT ATTRACTOR: top eigenvalue 1 with eigenvector marks (x) e_0; iteration from any positive start converges. [E] ONE HAND = RECOVERY: 1 network step + 2 N_fam=6 family micro-steps gives (2/3)^6 on marks (x) v_surv. [E] v324 EMERGES: T_full = T_net (x) T_cusp shares the same invariants; T_cusp is the 6-hand readout in the Galois/cusp basis (v317). [E] GROWTH + FIBER: v299 E6->E7->E8->E8-hat unchanged with M-fiber attached. [O] 3-arm seed (P2) + phi0 (v312) remain irreducible.

Read the original Python source
Linked claims

Coxeter atoms

v394_coxeter_atoms.py · frontier

Read the registered purpose, outcome and evidence links

COXETER.ATOMS.01: the clockwork coherence -- the three Coxeter primes ARE the three anchor atoms ARE the three number-field facets, and the prime-2 seam is the common dynamical factor. A bird's-eye [E] re-reading tying v390 (facets) to the anchor a=(1,1,2) and v319 (5x6 clock); also registers the residual-asymmetry question RES.COXETER.SYMMETRY.01 as a tracked [O]. [E] a=(1,1,2): e3=2=|Z2|, p0=3=N_fam, e2=5=g_car, product 30=h(E8). [E] atoms=facet fields (v390): 2->Q(i), 3->Q(sqrt-3), 5->Q(sqrt5), each ramified at its prime. [E] chi=729/665=3^6/(3^6-2^6), (2/3)^6=2^6/3^6, exponent 6=2 N_fam. [E] both dynamic rates carry prime-2: 2/3=|Z2|/N_fam, (phi+2)/4=(phi+2)/|mu4|, |mu4|=4=2^2. [E] 30=5x6=g_car*(2 N_fam). [C] the seam is the universal dynamic engine. [O] RES.COXETER.SYMMETRY.01 registered, not closed.

Read the original Python source

Seam state rigidity

v398_seam_state_rigidity.py · registry

Read the registered purpose, outcome and evidence links

Seam State Rigidity Theorem (Paper A / G_net): RP-definability hinge (OS transfer + quasi-free) + band-limited mu4-character core swept N=4..64 + holomorphy=>(E8)_1; [O] full-L^2 / intrinsic BW

Read the original Python source
Linked claims

External clock probe

v397_external_clock_probe.py · frontier

Read the registered purpose, outcome and evidence links

FR.CLOCK.PROBE.01: a FALSIFIABLE probe of how external the 'external physics' really is -- do the frontier scheme-numbers land on the {2,3,5} clock (the anchor atoms, v394) or not? Strict No-Free-Pattern (v100): 'on the clock' = an EXACT match, not a wide-band fit. [E] eta_B decuple A_Lambda=10=|Z2|*g_car ON CLOCK (v212). [E] Koide rate (2/3)^6=(|Z2|/N_fam)^6 ON CLOCK (v303). [E] axion spine angle 3pi/5=pi*N_fam/g_car ON CLOCK (v211). [E] proton C_p~2.83+-0.15 NOT discriminating (2^{3/2},17/6,14/5 all fit the band) => EXTERNAL (firewall v187/v374). [C] 3 of 4 land exactly on the clock; the irreducible external residue shrinks to the proton QCD number C_p -- 'external physics' was overstated. [E] anti-numerology: refuses to assign C_p a clock value.

Read the original Python source
Linked claims

Different evidence answers different questions.

A numerical calculation, a formal theorem and an experimental comparison carry different kinds of information. Follow the source appropriate to the claim.

Python calculations
Inspect the algorithm, its inputs and its negative controls. Run a browser compatible module here, or use the repository for the complete environment.Browse Python sources
Formal mathematics
Read the actual Lean statement and its assumptions. The carrier formalization has a defined mathematical scope.Inspect the Lean formalization
Independent implementation
The Wolfram implementation checks algebraic results through a separate computational path. The recorded runs report 116/116 base checks and 623/623 extension checks. This is distinct from external experimental replication.Read the Wolfram implementation
Physical comparison
Read each prediction with its freeze, conditions and failure criterion. A passing mathematical check does not decide the experimental comparison.Open the prediction register

What Lean proves and what it assumes.

The public source registry indexes 69 Lean files and 908 declarations. The declarations include definitions, interfaces and theorems. Each theorem has its own hypotheses.

Carrier rank
The Pascal carrier equation has the unique solution g = 5.Read the Lean statements
Hypercharge
The specified 3+2 carrier has the stated diagonal charges, zero trace and carrier polynomial.Read the Lean statements
Finite lattice glue
The isotropic glue for the stated discriminant form is unique up to sheet exchange. The carrier index arithmetic is exact.Read the Lean statements
Finite code structure
The Hamming code properties are checked on the explicit finite code.Read the Lean statements
Conditional clock theorem
Mark locality implies clock invariance in the given model. The physical seam must still be shown to satisfy mark locality.Read the Lean statements
Conditional continuum interface
The reduction uses named scaling limit and identification hypotheses. Its Lean statement records those inputs.Read the Lean statements

The CI core checks theorem signatures and declared axiom dependencies. Named seam assumptions remain explicit in the corresponding proofs. The physical identification of the original interacting source, full 3+1D dynamics and quantum gravity have separate requirements.

Run the same check on your machine.

From a checkout of the repository, install its Python requirements and run the first lattice module. The complete suite is a separate step.

Set up the repository

git clone https://github.com/sthamann/topological-fixed-point-theory.git
cd tfpt
python3 -m venv .venv
.venv/bin/pip install -r requirements.txt

Check the E₈ lattice

.venv/bin/python verification/v1_e8_glue.py

Read the individual checks and the final pass or fail result.

Run the registered suite

cd verification
../.venv/bin/python run_all.py

The full suite uses the dependencies and source context documented in the repository.

Repository setup and maintenance instructions

Read the current claim beside its source.

The research snapshot dated 2026-11-09 includes the active ledger, reviewed findings and registered scripts. It records source coverage and stated scope; it is not a new execution of every proof or calculation.

Trace the dependencies.

Select a node to inspect its inputs, outputs, scope and verification scripts. Browser compatible checks open the same verification viewer; native certificates provide their local command.

Explore the complete dependency graph

Keep the detailed research in reach.

The script index, figures and detailed research interfaces remain available below. This older technical overview preserves its original statements; use the current result inventory to follow later scope corrections.

Open the script index, figures and research details